PLYMOUTH, Wis. — February 18, 2026 — Heartland Video Systems, Inc. (HVS), a premier video systems integration, consulting, and expert ATSC 3.0 implementation firm, announced that it has completed an air-chain system upgrade enabling New Hampshire PBS (NHPBS) to prepare for future statewide ATSC 3.0 operations. This upgrade also included converting the NHPBS Stewartstown site to begin broadcasting ATSC 3.0 over-the-air (OTA) service. HVS provided the complete solution, including design and consulting services; all required hardware and software; system pre-staging and configuration; and remote support for equipment turn-on.
NHPBS operates a statewide OTA system comprised of three full-power transmitter sites in Durham, Keene, and Littleton, along with two additional low-power transmitter sites in Hanover and Stewartstown. NHPBS originates its OTA signal from the studio facilities in Durham. The project objectives included:
- Upgrading the existing ATSC 1.0 encoding solution to improve workflow
- Adding ATSC 3.0–compatible air-chain equipment for all five transmitter sites
- Providing regionalized EAS messaging capability across the state
- Flash-cutting one LPTV site (Stewartstown) from ATSC 1.0 to ATSC 3.0 OTA service
The upgrade began at the NHPBS studio with the replacement of the existing ATSC 1.0 program encoders with new primary and backup XOS units from Harmonic. These new encoders were equipped with MPEG-2 5xHD program licenses, Dolby™ audio, EAS processing, PSIP fetch, Nielsen watermarking, and audio loudness control, simplifying NHPBS’ workflow. A TSACO-3000 redundancy switch from DTV Innovations was installed at the output of the ATSC 1.0 encoder system to facilitate automated switching of the main and backup encoders.
Additionally, a separate pair of Harmonic XOS primary and backup encoders with HEVC-DASH outputs was installed for ATSC 3.0 signal processing. These encoders feed a redundant pair of Triveni Digital GuideBuilder XM ROUTE servers, which in turn feed five individual Triveni Digital Broadcast Gateways—one for each OTA transmitter site. The Broadcast Gateways provide the STLTP signals required to feed the ATSC 3.0 transmitters.
To enable regionalized EAS messaging, a Digital Alert Systems DASDEC-III EAS receiver with Multi-Station and Advanced Emergency Alert (AEA) software options was installed at the Durham studio, along with additional DASDEC-EXR units deployed at each of the five OTA transmitter sites. All DASDEC units are equipped with the company’s EAS-Net protocol for streamlined integration. This architecture allows each regional transmitter site to broadcast only the EAS messages specific to its coverage area. Previously, the entire state received the same EAS messages regardless of location. Given that New Hampshire spans approximately 190 miles north to south and features diverse terrain and weather conditions, this upgrade represents a significant improvement for viewers statewide.
The current NHPBS centralized ATSC 1.0 broadcast architecture distributes the same EAS messages to receivers across the entire state, regardless of viewer location. Given that the state of New Hampshire spans approximately 190 miles from north to south and features diverse terrain and weather conditions, there is a need to enable regionalized EAS messaging. To support this capability in a future ATSC 3.0 network, a Digital Alert Systems DASDEC-III EAS receiver with Multi-Station and Advanced Emergency Alert (AEA) software options was installed at the Durham studio, along with additional DASDEC-EXR units deployed at each of the five OTA transmitter sites. All DASDEC units are equipped with the company’s EAS-Net protocol for streamlined integration. This upgraded solution currently allows the Stewartstown ATSC 3.0 site, and in the future will allow each of the other regional transmitter sites, to broadcast only the EAS messages specific to its coverage area within the ATSC 3.0 format, representing a significant future improvement for viewers statewide.
The NHPBS low-power broadcast transmitter site located in Stewartstown, NH, is situated in the far northern region of the state. The site has been upgraded via a flash cut to begin broadcasting the ATSC 3.0 standard and is fed by an ATSC 3.0 STLTP signal from the Durham studio. HVS provided a new Rohde & Schwarz TMU9evo air-cooled UHF solid-state transmitter operating on RF channel D34. The transmitter is capable of up to 1,025 kW transmitter power output (TPO) in either ATSC 1.0 or ATSC 3.0 operation. Features include dual-drive exciters licensed for ATSC 3.0, GPS-based time synchronization, and ATSC 3.0 IP monitoring software. Transmitter installation and on-site proof-of-performance testing were subcontracted by NHPBS to a third-party provider.
To help NHPBS monitor the health and performance of its new on-air equipment, HVS supplied a Triveni Digital StreamScope XM analyzer for use at the studio. The StreamScope is configured to monitor IP, ASI, and RF signal inputs and is fully equipped to provide performance metrics for ATSC 3.0 signals. Additionally, HVS supplied an Airwavz.tv TVXplorer, which utilizes a RedZone receiver and a customer-supplied laptop PC for on-the-go testing of the ATSC 3.0 station signal at the Stewartstown site.
“What began as a bit of an overwhelming task, HVS quickly, and expertly, guided us to a solution that prepares us for the future. The HVS team are truly a remarkable bunch, and above all, patient in their approach and worked tirelessly until we had met our objective. We look forward to continuing our relationship with the HVS folks in future endeavors.” states Tom Nickodemus of NHPBS
“Tom’s comments really capture the spirit of this project—partnership, trust, and a shared commitment to serving viewers across New Hampshire,” said Dan Whealy, President of Heartland Video Systems. “NHPBS brought a clear vision for the future, and our team, working closely with our technology partners, was proud to deliver a more resilient, flexible, and scalable modern broadcast infrastructure. By strengthening air-chain redundancy and enabling regionalized emergency alerting, this upgrade positions NHPBS to better serve its communities today while laying a strong foundation for statewide NextGen TV operations.”
____________________________________________________
About Heartland Video Systems
Heartland Video Systems (HVS) has been supplying the U.S. with quality communication equipment, professional installation services, and ongoing technical support for 20+ years. HVS is a proud member of the Society of Broadcast Engineers (SBE), honored recipient of a 2010 Engineering Excellence Award, and a voting member of ATSC.
HVS has partnered with a multitude of major communication equipment manufacturers to provide technologies for all links in the broadcast chain. HVS offers a wide selection of manufacturers, enabling customers to easily choose the products they need while enjoying excellent customer service. HVS caters to many multimedia production platforms, including television stations, broadcasting stations, colleges and universities and postproduction facilities. We look forward to the opportunity to assist you in the audio and video equipment supply field.
